Видео

What happens if the power steering fluid gets to hot will it shut down because there is no heat tape around my pipes

Could you earth the mat somehow? Or earth yourself?!

Amazing video mate, well done!

What are the torque specs on the valve cover and air intake? Thanks!

good to see that other focus owner's having the same problems, I'm using galvanised 1.0mm steel, which hopefully solves the need for constant maintenance!

Now I know why my father, a physical chemist for an oil company, told me that "oil men" hate ethanol. Too easy to contaminate in large underground tanks with water, from condensation or other environmental source. I always seek ethanol-free fuel. One thing I learned from him is that when the big tanker trucks come and fill up a gas station, the flow stirs up whatever contaminants happen to be in the bottom there. This was one of his first investigative projects back in the 1950s, and I don't know how they have improved it.

Can it hold impact sockets?

Hi Mark, at first I happy to see another video of my favourite video only I read your reply about Debbie passing away. I feared for it as I did follow her status updates at the end of your videos. I want to give you and your family my deepest condolences.

Those plastic covers cover up big time rust.

Mate, great video , but what are the charges after the 2 years free update is over ?

Hey Mark! I always enjoy your videos, but haven't seen them pop up in a while in subscription feed, even though you have clearly been uploading. I just want to share my deepest regret for your loss, I had no idea this had passed. Wishing you and your family all the strength, love and courage to get through this together. This was really saddening to read. Cancer is such a shitshow.. My sympathies!

This was painful to watch...

If you click "SHOW MORE" in the description above your be able to see Links to the Tools I use. Also Clickable Chapters throughout the video and other Links that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.

Brilliant bit of kit these, only issue i've found is it wont diagnose all modern cars after 2020 since some ECUs communicate exclusively over DoIP, the newer Range Rover Evoque L551 being an example.

Vous faites beaucoup trop travaux en plus la batterie les durites sa n'a rien a voir pur enlever la pipe d addition retirer tout simplement le support moteur et descendre ou monter le moteur à l'aide d un cric une bonne demie.heure de gagner

Perchè non hai cambiato il paraolio albero motore?

Did your patch job work? You missed the 4 board hold solder-down pins. Mine the solder broke loose to the 4 board hold-down pins (no screws there); and all went to hell from there. Engineers could have put conductive springs under the main harness, solenoids, and pump push-pins.

I bough this to reprogram the throttle body on my clio, turns out I can't, even though it says on their coverage list as a listed function. It doesn't do a single more thing than the free app Pyclip with an obd dongle i was using before. Was also hoping that I could diagnose a peugeot 306, confirmed that the ecu was supported, turns out it doesn't too. I select the ecu and the screen goes white and nothing happens. Waste of money.

Oh Mark, I’m so sorry- I walked into that one.

If you click "SHOW MORE" in the description above your be able to see Links to the Tools I use. Also Clickable Chapters throughout the video and other Links that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.

toto fait de le mecano

I have to bleed the brakes on my sons fiesta tomorrow and someone painted the calipers and nipples, which has rusted off of the flats on the nipple but I am really hoping the threads down low are ok and I have gas to try and burn the paint off.

7:00 that point saved me a lot of headache... thanks for showing the disconnection of the wiring!!!

Have to wonder why no class-action suits against the module manufacturer. Connections are garbage, and especially considering the vibration when the solenoids engage to pressure up and down. The solenoids bouncing around against the board, like a rigged casino slot machine for the dealer/manufacturer; a literal jackpot, lottery.

i have a peugeot 508 1.6 thp 2012. It may be the reason for the oil pressure failure after long use. please help me.

I was watching this and I thought, What the hell? Nice one Mark, I thought you had lost them.

How do you charge them???

So if the emergency release is pulled, the wires have to be taken off the caliper to re-set it? Is that why one of my wires snapped?

My power steering falls out when the motor gets hot and I turn the engine off after about 30 minutes I have the power steering back

Can i send a 2010 subar legacy module for you to fix ?

hi, is the place where you fixed the struts strong enough? because I don't know where to fasten the bottom except for the jack and I'm afraid to lie down under it, thank you

You have to report stored petrol to the to the authorise in europe? I would consider that an invasion of my privacy. I keep multiple 5 gallon cans in my garage for lawn mowing equipment and for my emergency generator.

Thank you very much for this video, its gonna be a great help to replace my valve stem seals

Dzięki za taki filmik wreszcie wszystko prosto i zrozumiałe bez żadnych wywodów i doktoratów super ×))

Thank you.

What I would like to know is what really happens when the belt fail while is on idle, does the piston bend the valves or not?

You honestly make the best and clearest videos on car repair; so glad you focus on the buggy i have. Been fighting a p2096 for almost a year. always learn a ton from your videos- Ordered that same kit, and loaded with some good ideas - feeling hopeful again!

nice vid clear discription , a baked bean tin is the exact size for the seal

Surely putting all that oil from your fingers all over the shoe material just ruined the shoes? I know brake cleaner exists but it doesnt get all it all out

hello, a cuestion, chinese brands are in the list??

What difference would an oil change do ,bollocks a total mad design .

I need the fuel out cause the fuel pump is dead lmao

Could this be used to torque lug nuts using a digital torque adaptor like the one you used in this demonstration? Means you dont need to buy a dedicated torque wrench. At the 17 minute mark when you were using the tool as a normal ratchet to tighten the lug nuts, maybe just set the digital torque adaptor to 80nm or whatever the desired tightness may be and then wait for the adaptor to beep ?

Its such a good idea 😂 ford had same brain wave with the ecoboom engine and of course no one had had any trouble with either of these engines

Again thanks for posting, your doing a great service to the mini community

Please don’t give up showing your videos, I’ve done this and know how hard it is and I’ve got a ramp. Great video, love the colour coded diagrams and will help the home mechanic loads👍👍👍

Thank you very much, the best instructional film I have ever seen, Excellent!

I obtained a chemical compatibility chart to ensure that the drinker will resist: 2017_Chemical_Compatibility_Material_Properties.pdf

Finally, a chemist at the helm.

Proszę pozostać sobą, w tej markistowsko-komunistycznej rzeczywistości to cenna wartość.